All Products

Filter by Category

Showing 44 of 44 products

Main Products

SEPP AMINE UNGU / ENRICHED / PUTIH

SEPP AMINE

Amine‑based (aMDEA) solvents formulated by PT Sentosa Eka Perdana Prima for selective removal of CO₂ and H₂S from natural‑gas and syngas streams. Offers high acid‑gas loading capacity with lower regeneration energy compared to conventional amines.

SEPP Bentonite

SEPP Visco

Sodium bentonite clay that rapidly hydrates to build viscosity and suspension in water‑based drilling fluids.

SEPP XCD / XCD Premium

SEPP Visco

Xanthan‑based polymer delivering strong low‑shear viscosity for efficient hole cleaning.

SEPP Guar‑Gum

SEPP Visco

Natural polymer used for viscosity and fluid‑loss control in low‑solids muds and frac fluids.

SEPP GELTON

SEPP Visco

Special‑blend gelling agent for rapid viscosity build in sweeps and LCM pills.

SEPPBRIEN MV* (KCl Compatible)

SEPP Visco

High‑temperature viscosifier formulated to maintain rheology in KCl and other saline muds.

SEPPBRIEN MV (CaCl₂ Compatible)

SEPP Visco

Viscosifier designed for calcium‑brine drilling fluids with high thermal stability.

SEPP PAC‑L (Premium)

SEPP Visco

Premium PAC‑L with higher substitution for superior thermal stability and lower dosage.

SEPP PAC‑R (Premium)

SEPP Visco

High‑viscosity PAC‑R variant with enhanced shear stability and HTHP filtration control.

SEPP OS A

SEPP Treatment Chemicals

Low‑toxicity bisulfite blend that removes dissolved oxygen from WBM and aerated muds.

SEPP OS

SEPP Treatment Chemicals

Powerful scavenger to remove dissolved O₂ from drilling and completion fluids.

SEPP 0099A

SEPP Treatment Chemicals

Triazine‑based scavenger that eliminates H₂S in drilling fluids and production fluids.

BioSEPP

SEPP Treatment Chemicals

Broad‑spectrum biocide for controlling aerobic and anaerobic bacteria in WBM.

CORR SEPP 0333

SEPP Treatment Chemicals

Filming amine package protecting freshwater‑base fluids and packer fluids from corrosion.

CORR SEPP 0333D

SEPP Treatment Chemicals

Film‑forming inhibitor for work‑over/completion brine systems and WBM.

PRIMARY DEMUL

SEPP Treatment Chemicals

Primary emulsifier and wetting agent for conventional diesel/oil mud systems.

SECONDARY DEMUL

SEPP Treatment Chemicals

Secondary emulsifier that boosts emulsion stability and reduces HPHT filtrate.

Drilling Detergent

SEPP Treatment Chemicals

Low‑foaming surfactant that reduces surface tension, prevents bit balling and emulsifies oil.

Surfactan

SEPP Treatment Chemicals

Special additive that wets the bit and BHA to prevent balling in sticky formations.

Potassium Chloride (KCl)

Garam / Salt

Dry or brine KCl providing potassium ions for shale inhibition and density up to ~9.7 ppg.

Calcium Chloride (CaCl₂)

Garam / Salt

Calcium chloride powder or brine for density control (≤ 11.6 ppg) and shale stabilisation.

NaOH

Garam / Salt

Caustic soda pellets or beads to raise pH and neutralise CO₂ or calcium contamination.

KOH

Garam / Salt

Potassium hydroxide provides both pH elevation and potassium ions for shale inhibition.

Sodium Carbonate (Soda Ash)

Garam / Salt

Na₂CO₃ precipitates calcium ions and buffers pH ~10 in water‑based muds.

Sodium Bicarbonate

Garam / Salt

NaHCO₃ mildly lowers pH and precipitates calcium in cement‑contaminated mud.

LIME

Garam / Salt

Hydrated lime supplies Ca²⁺, raises pH and strengthens filter cakes in lime muds.

Supporting Products

SEPP Antifoam‑AF

Amine Antifoam

All‑purpose silicone‑based defoamer for immediate foam knockdown in WBM.

Aluminium Stearate

Amine Antifoam

Powder defoamer that controls surface foam and entrained air in water‑based mud.

Tri‑ethylene Glycol (TEG)

Hot Oil

TEG absorbs water vapour from natural‑gas streams, preventing hydrate formation and corrosion.

Mono‑ethylene Glycol (MEG)

Hot Oil

MEG removes water vapour and prevents hydrate formation in wet‑gas pipelines and subsea tie‑backs.

Potassium Chloride Brine 45 %

Alkali & Chloride

Pre‑mixed clear 45 % KCl brine that delivers potassium ions for shale inhibition while providing density up to ≈ 1.16 SG (9.7 ppg).

Caustic Soda Liquor 50 %

Alkali & Chloride

Bulk NaOH solution (50 wt %) for rapid pH control, alkalinity maintenance and acid‑gas neutralisation without the dust issues of flakes/pellets.

Potassium Hydroxide Liquor 45 %

Alkali & Chloride

KOH solution that simultaneously elevates pH and supplies K⁺ ions for shale inhibition—ideal where scaling or sodium contamination is a concern.

Sodium Chloride Brine Saturated

Alkali & Chloride

Field‑ready saturated NaCl brine (≈ 9.8 ppg) used for density, well control and chloride stabilisation in completions or drilling fluids.

Barite

Drilling Fluid

API‑grade barium sulfate (4.20 SG) weighting agent used to raise mud weight with minimal rheology change.

HEMATITE

Drilling Fluid

High‑density (5.05 SG) iron‑oxide weighting agent for ultra‑heavy drilling fluids.

RESINEX

Drilling Fluid

High‑temperature resin additive that stabilises rheology and controls fluid loss up to 220 °C.

SEPP CLAY‑SHIELD

Oil Production Chemical

Quaternary polyamine that suppresses clay swelling and dispersion in reactive shales.

SEPP POLYGLYCOL

Oil Production Chemical

High‑molecular PEG that bonds to formation solids, improves filter‑cake quality and lowers torque & drag.

SEPP PPD‑800

Oil Production Chemical

Advanced pour‑point depressant that lowers wax‑appearance temperature and maintains crude oil pumpability at low ambient temperatures.

SELUB 950 Lubricant

Oil Production Chemical

High‑performance synthetic lubricant that minimises differential sticking and reduces torque & drag in both WBM and OBM.

SEPP DEMUL F‑100

Oil Production Chemical

Nonylphenol‑free demulsifier that rapidly breaks water‑in‑oil emulsions, lowering BS&W to export specifications.

Offshore operation

Technical Service

Field engineering and operation support for offshore chemical and mud programs.

AGRU operation

Technical Service

Onshore AGRU (Amine Gas Recovery Unit) operational support and troubleshooting.